Recent content by seyles

This was my understanding, but the bend should be up so it straightens out once bolted into the plinth.

I think I will use the oil as Mr Pig suggested, at most I would just strip the top (masking the sides) and oil the top, working in with fine wire wool. I'm can't see me trying to sand it down, as you say, where do you stop and it would probably look like a dogs dinner, if it wasn't fluted maybe...

Thanks for all your replies, I'm not looking at spending a lot to get this looking better, so a Khan at £800 is way out of my price range; at that sort of outlay I'd rather replace the whole thing for a Gyrodec (always licked the looks and to be honest vinyl is very much a secondary source for...

I want to give my LP12 a light refurbishment; I have a new(er) cirkus bearing, sub-platter and sub-chassis along to replace the existing white lined bearing etc. I need some advice re the top plate; should I get a replacement for the existing as it dips on the arm board side by about 3mm as...

Back to the fish watching

Loki checking the fish out Knocking on my office window

Loki knicked the dogs bed tonight as it fits him so well. Laufey relegated to the floor

Or two normal sized cats…

No grills (Dynaudio BM5A) Cat more interested in the birds outside, using the Meridian 500 series as a seat. I think cloth grills would attract him more, he does like to make things his personal scratching posts. After he realised he was being watched…

The Meridian 518 sits between the transport and the DAC; AES input and output. It does a number of things: Resolution enhancer, takes the 16bit word length from the CD transport and can enhance it to 18, 20, 22 or 24 bits to get the most out of the DAC (it's more than padding the least...

After grooming…

He gets a few knots every now and then, my wife cuts them out. He tolerates the grooming for a while then starts to bite her. They have an understanding which I don’t understand…

Meridian 500 transport mk2 or mk3 And feed it through a Meridian 518 that can be bought cheaply.

It's not true balanced, there is just a module on the output of the 101B. I'd only be bothered if there was interference being picked up on the cables between the 101 and M2, then a balanced connection would get rid of it through common mode rejection (I'd use starquad cable too for the...