Recent content by malandros

Does 250 need hicap or can be connected to 32-5 directly?

Ok chilly. I've seen the link, unfortunately the seller does not send out of his country. But of course similar ones are largely available around here. A bit more expensive may be.....anyway my repair shop guy soul have some....but I can get me one too. The is very much for being so...

Ok Stu now I see what is it....here we have that kind of tool.....but, as far as I know, it is only and exclusively used as a drill, and to drill concrete, Briks, tiles, and the like. We turn a bolt on the drill, and it starts hamming......to use it as a screw driver it should have a force...

it is this one here? https://www.amazon.co.uk/dp/B0001P02RK/?tag=pinkfishmedia-21

I understand. I don't have one, but then repair shop where I left the unit has it for shure. To give it a trial does not cost anything, anyway. But let me be humbly skeptical . . . .the tool can't possibly apply more strength then an Allen key held by a grip, hit by an hammer . . . .but thanks...

Just by the way.....once open, there will be the issue of how to act to service the unit . . .I've found here al least 3 topics where the issue has been treated estensively, but I will open a new tread to try to confirm, and make clear all the details....let's put the issue aside for now. Have a...

Ok hp1, it is all clear now, thanks for the kind explanation. I've very well understood the logic behind you're advise, this is important as it makes me able to act properly since I know why I'm doing this . . . The operation you suggest will be the last one before the drill....even if, as you...

Well mega lord...I'm glad you made it.... but, as I said, we tried holding an Allen key with a grip, and hitting the grip with ah hammer.....and the dam thing couldn't care the less...... but thank you anyway!! I'll let you know how it goes.

OK misterc6, loud and clear! As I said, WD40 will hopefully have some effect on Monday, we put it on here yesterday afternoon . . . And the shop where I left the unit will reopen on Monday... from memory, all the 3 dam bolts look same size . . . But I may be wrong. I'll take in good...

Yes yes SJ we did it already . . .lets see if on Monday it will have some effects . . . May be . . Thanks anyhow

Well Venton, here the Allen keys are L shaped, and quite small. We put one in there we'll firmly, and tried to force using a grip.....we tried very hard....no way. We even hit the grip with an hammer . . . . Monday, after soaking two days in WD40, let's hope . . . Thanks a lot!!!

No, unfortunately not Tony, the heads are in perfect shape so far..... and we put some WD40 already . . . only, we dried right away....but now, since the shop where the unit is now will open on Monday, the stuff will be all the time to work, if ever . . . So on Monday morning, we'll have...

Now, that was indeed a full clear explanation if I've ever seen one. Well, thanks misterc6!!!! I've omitted to mention, we did try already with an hammer .... and several times. No way!!! My technician over there said he could try with a drill, but this will Spoil both the screw and the hole...

hp1, I'm not sure of your meaning....language is also a problem . . . You say to use a sharp tool, (a drift, right?) to point at the center of screw heads, vertically, and, with an hammer, hit sharply, so to possibly loosen the thread of the screw . . . . did I get it?

Thanks. I'll give it a trial