advertisement


Recent content by Flyingorthopod

  1. F

    Replacing a 13 amp IEC with a 20 amp IEC

    What are you planning to change or achieve by changing the plug?
  2. F

    Speakers close to wall suggestions - largish room

    My ae509 are fairly close to but not hard against the rear wall and are happy there. About 20cm away,so not much different really than some of the larger speakers suggested here.
  3. F

    Mains IEC Connectors, I never realised !!

    But might stop your installation killing you, your family, and everyone else in your substation supply if you are TNC and a supply neutral fault develops and your new earth becomes the neutral line for the whole postcode. Suggest getting it checked by an electrician.
  4. F

    Mains IEC Connectors, I never realised !!

    Star earth is in general a really good way to make an antenna to receive rfi
  5. F

    Mains IEC Connectors, I never realised !!

    How is your hoise wiring earthed? If you are pme and in the UK you will need to bond that earth back to mains
  6. F

    TD150 - RB300 mounting question

    Thanks, shall.experiment when it comes back with correctly mounted rb300
  7. F

    TD150 - RB300 mounting question

    I've had the td150 with rb300 running for quite a long time and have been pretty happy with it, albeit aware it wasn't perfect. I'm intrigued to.see how much difference correcting the tonearm mounting makes
  8. F

    TD150 - RB300 mounting question

    armboard. Hateful autocorrect.
  9. F

    TD150 - RB300 mounting question

    Thanks. Sorting the armband. Hopefully the lid will still fit!
  10. F

    TD150 - RB300 mounting question

    Sorry for another TD150 related question. Grateful for advice. Deck is with a very helpful local shop for service. Springs are sorted. However he has pointed out that the RB300 I had fitted 25 odd years ago isn't quite at the right position - the spindle to pivot distance is about 7mm out. This...
  11. F

    Td150 springs from intovinyl

    Might try the mushrooms. I've discovered the tonearm, rb300,is mounted 7mm too close to the spindle. How much difference is this likely to.make? It sounds pretty good to me....
  12. F

    Td150 springs from intovinyl

    One of them bottoms out however much I adjust the nut and has no bounce. If there's a solution I'd be happy to learn!
  13. F

    Td150 springs from intovinyl

    Thanks, they aren't shipping to UK at the moment and didn't reply to a couple of emails I sent
  14. F

    Td150 springs from intovinyl

    Hi all My td150 needs new springs. New options aren't all that easy to find. Has anyone got experience of the replacement sets from intovinyl.com? Thanks
  15. F

    Let’s hear it for Rega gear

    I've been a rega fan for ages, now enjoying an elicit 5 into ae509. Spotted their prototype pre and power amp on Twitter, definitely intrigued


advertisement


Back
Top