advertisement


Recent content by Cool_jeeves

  1. C

    [FS] EMT 930st, 929, 155st, TSD15 SFL

    Awesome. Saw it too late!
  2. C

    [IC] Nakamichi BX300E

    I have this also, a true recording king...
  3. C

    Cricket 2023

    I don’t remember when last Stone played…been very long. He must have had a series of injuries. He looked the most threatening after the unfortunate Archer. As for Archer, at least, age is on his side, no matter how bad his current stress fracture looks. Imran Khan, Lillee came back after serious...
  4. C

    Cricket 2023

    Whatever happened to Olly Stone and Jofra Archer? The speed gun is idle with England bowling nowadays.
  5. C

    [FS] REVOX R2R A77 M4/5 BLUE LOGO on front cover with DOLBY

    The photos looks like B 77 to me, not A77. Very confusing. Which are you selling?
  6. C

    [FS] Revox B250S B250 B261 H6 and Revox A77 Mk IV reel to reel recorder

    You are a legend. What a collection!
  7. C

    [FS] REVOX R2R A77 M4/5 BLUE LOGO on front cover with DOLBY

    upload in flickr and post link
  8. C

    SME V centering problem

    OK. I always tighten allen key bolts as per manual, and yes, the spirit level and test records are used to test Azimuth. I use the spirit level to check if top of fixed headshell is horizontal, but SME has sent me a message that that is just for "cosmetic effect" and it is the underside of the...
  9. C

    SME V centering problem

    I am using a Garrard 301.
  10. C

    SME V centering problem

    Some good news. I tried with min and max anti skate...it made no diff. I reinstalled my DL103R. It sounded perfect. I came back to the ART9. Now that is sounding symmetrical also. There must have been some installation problem despite all possible care I took in the process. What I can think of...
  11. C

    SME V centering problem

    Hi Craig, i will be able to do this on the weekend only...there is also the Brisbane Test Match...On the sound problem, i will 1) play with min and then max antiskate 2) note each time when image centering starts to happen correctly 3) take apart the whole thing and get back to the DL103R and...
  12. C

    SME V centering problem

    No way but to re-install the DL103R - verify all is well, then ART9 again (hopefully problem would have disappeared), then if it doesnt, send back. OK. Let me see... Painful with an SME V with its fixed headshell.
  13. C

    SME V centering problem

    No...i left the cart leads unchanged. Just changed the connections at the phono stage by swapping left and right. I expected the image to switch to the other wide and it did. In any case I am mentioning that the image moves slowly to center on its own. And that after that it is perfectly fine...


advertisement


Back
Top