Recent content by bob57

Hi Radfordman just checked your link and found that one fellow posted the values and connections and they tally with the one I had made so it looks like I have a problem somewhere else. Thanks all for your help. Regards Bob

Thanks Radfordman but I have circuit diagrams for the Cadet 3 and HG88 3 and niether of them shows the adaptor circuit. Regards Bob

Thanks Tony L, Not much good with the technical stuff, just had the adaptor made using a circuit diagram for the Cadet 3 Gold adaptor but just wanted to see if the component values were correct as one circuit shows a 250 cap and in the same position on a second circuit it shows a 2500 cap, not...

Speakers are bookshelf Bowers and Wilkins and they are connected in phase. All the other inputs are sounding fine just the phono stage with the adaptor that do not seem right.

Hi Can anyone help me with the value of resistors and capacitors for the Gold Pick Up Adaptor for the Rogers HG88 mk3 Amplifier. I have tried 250p, 680p, 68k and 720k it plays but very bright and little bass. I am using a shure M75 in a GL75 deck. I am using the circuit diagram for the...

I like to try different amps to see how they perform and with different sources. Although I am running out of space so will have to stop soon. I enjoy my music but also enjoy trying different components to see how they sound, and how the sound compares to their reviews. Regards Bob

I have a Sugden A21mk2 amp and would like to try a more powerfull "A" class amp. Can anyone suggest anything comparable to the Sugden in pure class A. I am already considering the newer A21a and the series 2 and also the SE but have yet to see them come up on the second hand market and am...

Speakers I have been using are older and include Tannoy Balmoral, Monitor Audio R352, Tannoy DC2000, Leak 2060, Goodmans Magnum, Wharfedale Pacific PI-40 and some smaller beovox I believe S45-2. Amps include NAP250, NAP180, Audiolab 8000a, NAD3020, Pioneer A445, Pioneer A400. All sounded...

Hi Just heard my nephews DJ active speakers ( Mckie 1520's ) they sound much better than any hifi speakers I have heard and much cheaper. Why dont the hifi mags advise giving these a try? Are their ears different to mine? Anyone got any views on this? Regards Bob

Thanks to all for advice. Looks like I best try replacing parts. Regards Bob

Can any one advise how to tell if capacitors or any other item of speaker crossovers need replacing and how they affect the sound, as all my speakers are getting old dating back to the 1970's? Regards Bob

Thanks Audio Images. Regards Bob

Thanks for info Audio Images. Would you know if they are 6 ohm? Regards Bob

Thanks Beobloke I will keep an eye on ebay. I have read a bit on the net about 2060's and some say the tweeters are wharfedale and some say SEAS can anyone confirm? Also I have read that 2060's are 6 ohm impedance and noted that the replacement tweeters are 8 ohm, should they also be 6 ohm...

Hi Just bought some Leak 2060 speakers and would like some information about the tweeters they require as they have been changed from the originals and dont sound to good. If original tweeters are difficult to come by I wonder if anyone could advise a suitable alternative? Is it possible the...