Another recommendation for Watford valves here.
I had a very poor experience with JJ 7591As bought from Watford valves in my Fisher 500C. Watford gave me a full refund after questioning the bias settings of the amp. I think it was just a bad batch from JJ, I will never touch a JJ valve again and I now stick to Electro Harmonix 7591s. They may be oversized but they don't go over bright and run away.
That's very kind of you, Sean.
If you have a pair of NOS Mullard ECC82 and four ECC83, we might be able to talk turkey.
Right now, I'm trying to wrap my head around the variables of (1) new vs used, (2) new vs NOS, (3) matching, (4) flavours and (5) pricing.
They are a limited resource and running out. I remember the large valve store at GEC McMichael, full of CV types, in Slough that went into landfill in 1985. They would be worth a fortune now.Everytime I look on there the less choice there seems to be...
Sorry,no, just the pair of ecc 83s and a variety of tuner valves EF86s, I thinkThat's very kind of you, Sean.
If you have a pair of NOS Mullard ECC82 and four ECC83, we might be able to talk turkey.
Right now, I'm trying to wrap my head around the variables of (1) new vs used, (2) new vs NOS, (3) matching, (4) flavours and (5) pricing.
…and a variety of tuner valves EF86s
Thanks Tony, I didn't know what they were for, they're obviously wasted on me. I need to dome some research an stick them in the classifieds or on ebay.They are a popular and sought-after tube, an input pentode and are used in Quad IIs, Leak TL12 Plus and many guitar amps.
One of the latter doesn't glow, but the in-built phono stage seems to work fine.
I'd like to refresh the valves on my newly acquired 20-year old preamplifier, which has a pair of 12AU7 and a quad of 12AX7. The current 'matched' pair of 12AU7s (Psvane with gold pins) are supposedly newish, but the 12AX7s seem to be original. One of the latter doesn't glow, but the in-built phono stage seems to work fine.
Where can I easily and reliably get a new set of matched valves, and what can I expect to pay for something halfway decent. I think the preamplifier was originally equipped with JJ Electronic valves, so that is the baseline.
Any advice from the valve/tube gurus would be much appreciated. I'm an absolute noob when it comes to thermionic devices.
James
James,
I've got hundreds of lightly used or NOS ECC83s, 5751s, ECC82s, and other small signal valves which you might be interested in. Bit of a long story but my father lives in the US and as a radio ham and tech has been building up a stash over the years, which he has now sent to me to sell as he is getting too old to put them to use, so a lot of them are US brands such as RCA, Sylvania, Westinghouse, GE, Kenrad, Raytheon etc, but I do also have some European valves including some Mullards and Phillips. I am getting around to setting up a shop on Ebay / Etsy etc as a side business but haven't yet found the time to do it, but I am updating a big spreadsheet with list of what I have and the prices which I can send over later this week if interested. I now also have a Maxipreamp and maximatcher valve testers so can test for Gm, noise, and gain and can get a quad matched up for any where I have 4 of the same type.
Or if you just wanted to use the Maxipreamp to test any you buy elsewhere then happy to test any if you like.
Cheers,
Bish
Hot Rox are another decent UK supplier.
I've had nothing but good experiences with modern production Sovtek manufactured valves, so far.
Identical.Are they the same brand and type? As stated by others upthread different designs glow differently. That can be designs within brands, e.g. a 50s long-plate Mullard will look different from a mid-60s short-plate.
Maybe for the Maxipreamp and maximatcher, but small valves are light and compact.Ah just spotted you are in NZ - might make it a bit trickier to send!
Maybe for the Maxipreamp and maximatcher, but small valves are light and compact.
If you can find a quad of matching ECC83 and a pair of ECC82 in your stash, I would entertain the idea of buying them from you.