say it as it is
pfm Member
hi all ok still trying to find my way about the DIY world been advised any amp build should have speaker protection fitted and my existing avondale amp.
I bought these cheap as chips ones as told anyone I could need upgrading so what needs doing to use this type needs a 12v supply so need to get a small transformer any recommendations for a small 12v tx to feed a speaker protection board?
so on the boards itself what do I need to change to either not degrade the sound or fail in short time.M!
thanks
https://www.ebay.co.uk/itm/300W-Dig...d=link&campid=5338728743&toolid=20001&mkevt=1
I bought these cheap as chips ones as told anyone I could need upgrading so what needs doing to use this type needs a 12v supply so need to get a small transformer any recommendations for a small 12v tx to feed a speaker protection board?
so on the boards itself what do I need to change to either not degrade the sound or fail in short time.M!
thanks
https://www.ebay.co.uk/itm/300W-Dig...d=link&campid=5338728743&toolid=20001&mkevt=1
This site contains affiliate links for which pink fish media may be compensated.