John, you've advised me before that with the DD2A if I want a second set of outputs to use for a sub woofer then I'd be better using a Y cable on the XLR outputs rather than use the RCA outputs for the sub. However I want to "manage" my subs with a DSP unit that only has RCA inputs. So I have a question; I know it's possible to create a pseudo Balanced cable when going from RCA to XLR, but does that cable configuration also work if you are doing the opposite I.e. going from XLR to RCA?
I’m not sure this is the right place to talk about the original m-dac anymore, but I am looking to upgrade my q-dac to something with two optical inputs and a remote control. Is the m-dac still a good choice or has it been overtaken?
Ok thanks John - I was worried that using both outputs at once would degrade the XLR output in some way . . .Hi Ian,
If your going to "Unbalance" the XLR output you might as well use the RCA output. Do the Martin Logan Subs only have RCA input?
John
I've been falling foul of Facebook. I have a new account, and I've applied to join the Lakewest audio group again. Name is John Powers. Please admit me. (The old Andy Clerenlas alias is dead.)
Clerenlas
I've had a Velodyne DD12 for years, plus the 2 Descent i makes 3. With MSO it doesn't matter if the subs are not all the same.3 You only 2 last week.
I found just adding a second made an immediate worthwhile improvement and that was before I did anything at all by way of calibration.I'll have 2 next week .
Need a bigger room for more
I'll have 2 next week .
Need a bigger room for more
that was before I did anything at all by way of calibration.
Paul,In perfect condition, as new fully boxed.
Closer to the end of the year again;
Will there be products this side of Christmas or are we full circle again next year ?
This seems to be a problem buying used ESLs; it’s almost like buying used Tubes - you have no idea how far the panels have degraded 8-/
Glad you will have one ‘new’ one to compare with
Paul
So, are we there yet with the chassis price?Sam,
We should have confirmed pricing on the Detox chassis in the next couple of weeks - we will request payment for the chassis, and once they arrive in Europe we will move to electronics production.