1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Where we are now: The site is back up and running! The character set encoding issue has been fixed so old posts should now look ok. I am currently working on themes/skins etc and I will be deleting the temporary green skin very soon as it has many issues. I will do a very quick variation on the stock blue skin first just to get a light-grey background and san-serif font, and I will set this as default. Later this week I will hopefully add a professional third-party skin in pfm colours (life is way too short to do this crap myself, and I've found one I really like than needs next to no tweaking). We are getting there slowly...
    Dismiss Notice
  3. May I please request people check and update their email address if it is out if date. I ask as I’m getting countless bounce errors as the server fails to send notifications through etc. I’ll eventually figure out how to send these to a black hole somewhere, but it makes sense to address it at source as quite a few folk are obviously not getting the thread and conversations notifications they have set in their preferences.
    Dismiss Notice
  4. Things you need to know about the new ‘Conversations’ PM system:

    a) DO NOT REPLY TO THE NOTIFICATION EMAIL! I get them, not the intended recipient. I get a lot of them and I do not want them! It is just a notification, log into the site and reply from there.

    b) To delete old conversations use the ‘Leave conversation’ option. This is just delete by another name.
    Dismiss Notice

Help with Ittock repair

Discussion in 'd.i.y.' started by jwilding, Sep 26, 2011.

  1. jwilding

    jwilding pfm Member

    Hello All,
    Can anyone help me out with a picture or a diagram of which wires goes where on an ittock? I'm looking to re solder the internal wires to the plug end. Thanks for your help.

    Cheers,

    JIm
     
  2. 337alant

    337alant Negatively Biased

    L (Left) = white
    LG (Left Ground) = blue
    R (Right) = red
    RG (Right Ground) = green
     
  3. 337alant

    337alant Negatively Biased

    Looking at the din socket, up into the arm, there are 5 pins if you numbered the pins starting from the lower left and going round clockwise it would be as follows;-
    1-red Right signal
    2-Green Right ground
    3- arm ground black if its in a linn TT it should have a short lead for the ground in the turntable and a long one to go to your Phono stage
    4-White Left signal
    5- Blue Left ground
    check with a multimeter from head shell to plug and plug to phono stage

    >3.
    2 . .4
    1 . .5

    Alan
     
  4. jwilding

    jwilding pfm Member

    Hi Alan,

    Thank you for your response. It was very helpful.

    Cheers,

    Jim
     

Share This Page